Genuine Estes Parts

This engine mount kit fits BT-50, 55, 56 & 60 tubes. Plus can be used to make a conversion mount for lightweight D powered rockets.

The Estes Fin Alignment Guide is Back!  No more guessing where your balsa fins go, this guide does it all for you. Easy to follow instructions...

Preassembled 12 in. (30.5 cm) Parachute.

Preassembled 18 in. ( 46 cm) Parachute.

Preassembled 24 in. (61 cm) parachute.

Contains two 1/8 in. x 18 in and one 1/4 in x 36 in. rubber shock cords and four shock cord mounts.

Model Rocket Display stand for all of your standard (18mm) engine size model rockets! Detatchable "launch pad-like" legs make for a sharp...

Finally some relief from the "wrap the masking tape around the tube and cut lightly along the edge" method of cutting body tubes! Heavy...

  Four body tubes per package.  Technical Specifications Inside Dimension: .518 in (13.2 mm) Outside Dimension: .544 in. (13.8 MM) Length:...

Three body tubes per package.     Technical Specifications Inside dimension: .950 in (24.1 mm) Outside dimension: .976 in (24.8...

Three body tubes per package.    Technical Specifications Inside dimension: 1.595 in (40.5 mm) Outside dimension: 1.64 in (42 mm)...

Hooks fit mini engines (one), regular and 'D' engines (three) and 'E' engines (two). Also includes spacer for 'E' engine...

Heavy duty engine mounts for ‘D’ and ‘E’ engines. Fits BT-55, 60 and 80 tubes.

Each package of nose cones contains four nose cones for use with the BT-20 body tubes. All have eyelets for shock cord and shroud line attachments....

Each package of nose cones contains four nose cones that will fit the BT-55 body tubes. All have eyelets for shock cord and shroud line attachments....

Each package of nose cones contains three nose cones that will fit the BT-60 body tubes. All have eyelets for shock cord and shroud line attachments....

Estes now offers waterslide decals for your building enjoyment. For the designer in you! Build your "scratch" rocket and finish it with our...

Contains five of  Estes' most popular Sci-fi nose cones! Fits various body tube sizes. Great for your own designs or just a replacement for...

6 Tube Couplers 2 each:  BT5. 1 inch long. 2 each: BT20. .75 inches long. 2 each:  BT50. 1 inch long.

2 Tube Couplers for BT80. 3 inches long.

Includes 27 parts to build engine mounts.   27 Pieces 3 each. BT5 body tube. 2 inches long. 3 each. BT5 yellow engine blocks. 3 each. BT5...

The perfect accessory for all 29 mm engines! The Motor Retainer Set allows you to quickly load and unload a motor by screwing on the retaining...

The Estes Mini to Standard size Engine Adapter allows you to use a mini Estes engine in place of an A8-3 standard size engine. Rockets weighing up to...

Adapts Estes 24 mm C11/D, Estes 24 mm E and Estes E30 series Composite engines to a 29 mm Estes casing size. 2 sets per package. Includes orange...

Estes PNC-5V Plastic Nose Cone.   Sometimes you do not want to buy the entire multiple-cone packs from Estes to get one particular nose cone you...