Model |
Item Image |
Item Name |
Price |
SR P-9020 |
|
As a scale modeler and for general hobby use, a set of digital calipers comes in real handy! These economical digital calipers make the most... |
$20.99
... more info
|
ARO-91295W |
|
It is often kind of hard to turn the aft clousure on 18 through 29mm Aerotech reload casings without a little extra help. Well, this simple... |
$19.79
Add:
|
SR P-0012 |
|
Set of 6 metal-handled epoxy brushes. Great for spreading epoxy and then just tossing in the trash! |
$1.59
... more info
|
SR P-9030 |
|
Set of tools designed to set engine blocks/thrust rings easily at the normal distance inside the motor mount tube for standard model rockets (so that... |
$5.99
Add:
|
SR P-0004 |
|
Keep a fresh set of single-edge razor blades on your workbench! Dull blades don't cut, they tear, and rip, and cause injury. So keep a sharp set at... |
$1.75
Add:
|
ODDL Adeptor |
|
Face it, as I get older, the less I like getting down to the ground to hook up clips on a small model rocket launch pad. Years ago, I converted a... |
$13.99
Add:
|
ODDL Raise Spring |
|
The Odd'l Rockets Raise Launch Rod Adjustment Spring takes the place of empty motor casings , charred and dirty clothespins or messy tape to prop... |
$1.99
Add:
|
BAD 121 |
|
Something I really like to have handy around the paint shop for stirring those settled and separated bottles of model paint. It sure beats trying to... |
$20.99
Add:
|
ODDL Raise Spring 10pk |
|
10-Pack The Odd'l Rockets Raise Launch Rod Adjustment Spring takes the place of empty motor casings , charred and dirty clothespins or messy tape... |
$14.39
Add:
|
EST 2226 |
|
How high did it really go? Next time, measure it with this easy to use device. Take learning to new heights with this low-cost technology solution... |
$11.99
Add:
|
EST-2227 |
|
Easy way to mark your fin and launch lug placement lines. Also includes a fin gluing jig. |
$13.99
Add:
|
EST-2228 |
|
The new Estes jig that helps to mark lines lengthwise along Estes body tubes. Takes the place of the "mark the lines on a door-jamb"... |
$12.99
Add:
|
EST-2231 |
|
The Estes Fin Alignment Guide is Back! No more guessing where your balsa fins go, this guide does it all for you. Easy to follow instructions... |
$23.99
Add:
|
EST-2290 |
|
Model Rocket Display stand for all of your mini engine size model rockets! Detatchable "launch pad-like" legs make for a sharp and sturdy... |
$8.99
Add:
|
EST-2291 |
|
Model Rocket Display stand for all of your standard (18mm) engine size model rockets! Detatchable "launch pad-like" legs make for a sharp... |
$8.99
Add:
|
EST-2292 |
|
Model Rocket Display stand for all of your D and E-size (24mm) engine size model rockets! Detatchable "launch pad-like" legs make for a... |
$8.99
Add:
|
EST-2293 |
|
Model Rocket Display Cradle your model rockets! Detachable "launch pad-like" legs make for a sharp and sturdy display stand for your rockets.... |
$9.99
Add:
|
EST-2315 |
|
Finally some relief from the "wrap the masking tape around the tube and cut lightly along the edge" method of cutting body tubes! Heavy... |
$13.99
Add:
|
EST-2318 |
|
Estes Ultimate Sanding Bar Load sandpaper into this ergonomic sanding block so that you can handle sanding projects with comfort and no slowing down.... |
$14.99
Add:
|
EST-2319 |
|
Adhesive Backed Sandpaper refill for the Estes Ultimate Sanding Bar. Includes: 2 sheets each of 80, 120 and 240 grit sandpaper. |
$7.99
Add:
|
TAM 87030 |
|
18 meter long roll of 6mm masking tape with reuseable plastic dispenser. Tamiya masking tape is a low-tack paper tape with a clean edge that... |
$5.25
Add:
|
TAM 87031 |
|
18 meter long roll of 10mm masking tape with reuseable plastic dispenser. Tamiya masking tape is a low-tack paper tape with a clean edge that... |
$5.75
Add:
|
TAM 87032 |
|
18 meter long roll of 18mm masking tape with reuseable plastic dispenser. Tamiya masking tape is a low-tack paper tape with a clean edge that... |
$7.50
Add:
|
TAM 87033 |
|
18 meter long refill roll of 6mm wide masking tape. Tamiya masking tape is a low-tack paper tape with a clean edge that makes getting the best... |
$2.60
Add:
|
TAM 87034 |
|
18 meter long refill roll of 10mm wide masking tape. Tamiya masking tape is a low-tack paper tape with a clean edge that makes getting the best... |
$3.20
Add:
|
TAM 87035 |
|
18 meter long refill roll of 18mm wide masking tape. Tamiya masking tape is a low-tack paper tape with a clean edge that makes getting the best... |
$4.60
Add:
|
TAM 87177 |
|
Tamiya Masking Tape For Curves. Flexible 2mm wide tape aids in masking non-straight lines. |
$6.50
Add:
|
TAM 87178 |
|
Tamiya Masking Tape For Curves. Flexible 3mm wide tape aids in masking non-straight lines. |
$6.50
Add:
|
TAM 87179 |
|
Tamiya Masking Tape For Curves. Flexible 5mm wide tape aids in masking non-straight lines. |
$6.50
Add:
|
EST-2316 |
|
The Estes Mini to Standard size Engine Adapter allows you to use a mini Estes engine in place of an A8-3 standard size engine. Rockets weighing up to... |
$6.99
Add:
|
EST-2317 |
|
The Estes Standard to D size Engine Adapter allows you to use a standard Estes engine in place of a C11 or D12 Estes engine. Rockets weighing up to 4... |
$6.99
Add:
|
EST-9753 |
|
Adapts Estes 24 mm C11/D, Estes 24 mm E and Estes E30 series Composite engines to a 29 mm Estes casing size. 2 sets per package. Includes orange... |
$6.99
Add:
|
XAC X3311 |
|
The venerable X-Acto #1 Knife handle and #11 blade are some of the mainstays of hobby rocketry. Everyone needs a few around the workshop! Use... |
$5.89 $4.88
... more info
|
XAC X3724 |
|
I have lots of different types of X-Acto knives in varous places around my workshop. One of my favorite go-to knives is the X-2000 knife. ... |
$6.99 $5.79
... more info
|
ARO RDDT |
|
AeroTech has released a new delay drilling tool for use with its line of 18-38mm RMS™ and RMS-Plus™ reloadable motors. The RMS Delay Drilling... |
$25.29
Add:
|
ARO 54RDDT |
|
The 54mm RMS Delay Drilling Tool™ (or RDDT54™, P/N T082510-2) is designed for shortening RMS delay elements to adjust the time delay of a 54mm... |
$25.29
Add:
|
ARO UDDT |
|
The DMS (Disposable Motor System) Universal Delay Drilling Tool is the new tool for adjusting the delay on the new RMS-EZ reloads as well as the new... |
$17.49
Add:
|
ARO 99217 |
|
3-oz. tube of Super-Lube Synthetic Grease for lubricating O-rings in reloadable motors. |
$7.69
Add:
|
ARO 99218 |
|
400 gram can of Super-Lube Synthetic Grease for lubricating O-rings in reloadable motors. |
$17.59
Add:
|