38mm Reload Adapter System
Ever wish you had a little more flexibility with your RMS 38mm casings? One way make more use out of the casings you have is to try the AeroTech 38mm Reload Adapter System. The system allows the use of shorter (lower power) RMS reload kits within a specific motor casing, reducing the number of cases necessary to fly a wide range of AeroTech reloads.
The new system is similar in concept to AeroTech`s model rocket and R/C RMS motors that use "grain adapters" within the combustion chamber to permit the use of different length and power reloads within each motor case. However, the new high power adapter system is external to the combustion chamber and actually allows the use of the same reload within multiple case lengths, and also permits one case to house different length reloads. The reload adapter system consists of three components: A new "floating" forward closure that can be positioned anywhere inside the length of an RMS casing; one or more tubular "case spacers" that sit immediately forward of the closure; and a threaded retaining ring that holds the assembly together. The standard retaining ring has a large opening that permits the ejection charge end of the floating forward closure to protrude beyond the end of the case when no grain spacers are being used.
Existing AeroTech reload kits can be loaded into motors using the reload adapter system with no modifications necessary. All reload kit parts are used in their familiar positions and configuration.
Add this kit to your 38mm reload hardware NOW!
